On and Off

In certain situations, it may be desirable to switch City Safety™ off, such as when driving in close quarters where leaves, branches, etc. may obscure the hood and windshield.
When the engine is running, City Safety™ can be switched off as follows:
Press My Car in the center console control panel and go to Settings Car settings Driver support systems City Safety. Select Off.
If the engine is switched off, City Safety™ will reactivate when the engine is restarted.
WARNING
The laser sensor emits light when the ignition is in mode II or higher, even if City Safety™ has been switched off.
To switch City Safety™ on again:
• Follow the same procedure as for switching City Safety™ off but select ON.
See also:
Introduction
Adaptive Cruise Control (ACC) is an optional
system designed to assist the driver by maintaining
a set speed or a set time interval to the
vehicle ahead. It is primarily intended for use
on lo ...
Fastening a seat belt
Buckling
Pull the belt out far enough to insert the latch plate into the receptacle until
a distinct click is heard. The seat belt retractor is normally "unlocked" and you
can move free ...
High/low beam headlights
Headlight switch and lever
1 - High beam flash
2 - Toggle between high and low beams
High beam flash
Move the lever toward the steering wheel to position 1. The high beams come on
until the ...
