On and off

On and off - Operation - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

To switch Collision Warning on or off, press MY CAR on the center console control panel and go to Settings Car settings Car settings Driver Driver support systems Collision Warning. If Collision Warning. If Collision Warning is on, the system will perform a self-test each time the engine is started by briefly illuminating the warning light. See page 134 for more information about the menu system.

When the engine is switched on, the Collision Warning setting that was being used when it was switched off will be the default setting.

    See also:

    Setting a speed
    Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

    Unlocking a channel
    A channel's access code is required to unlock a channel. Unlock all channels This permanently removes all channels from the locked list and makes them available for selection. Temporarily unl ...

    Immobilizer (start inhibitor)
    Each of the keys supplied with your vehicle contains a coded transponder. The code in the key is transmitted to an antenna in the ignition slot where it is compared to the code stored in the s ...