Brake Support

Brake Support - Function - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

If the risk of collision continues to increase after the collision warning has been given, Brake Support is activated. Brake Support prepares the brake system to react quickly, and the brakes are applied slightly. This may be experienced as a light tug.

If the brakes are applied quickly, full braking effect will be provided. Brake Support also increases brake force if the system determines that the driver has not applied adequate pressure on the brake pedal.

    See also:

    Locking the vehicle
    Models with keyless drive have a pressure-sensitive area on the outside door handles and a rubber- covered button next to the trunk opening control The doors and the trunk can be locked by pressi ...

    Washer fluid reservoir
    Washer fluid reservoir The washer fluid reservoir is located in the engine compartment and holds approx. 6.8 US qts (6.5 liters). When there is less than approximately 1 US qt (1 liter) rem ...

    Changing
    WARNING Connect and disconnect the positive and negative cables in the correct sequence. Removal Switch off the ignition, remove the remote key from the ignition slot and wait at least 5 ...