See also:

Removing the cover to access the bulbs
NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...

Immobilizer (start inhibitor)
Each of the keys supplied with your vehicle contains a coded transponder. The code in the key is transmitted to an antenna in the ignition slot where it is compared to the code stored in the s ...

Calibration
The compass may need to be calibrated if, for example, the vehicle is driven into a new magnetic zone. The character C is shown in the mirror's display if calibration is necessary. 1. Stop the ...