See also:

Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on. The audible warning signal can be activated/ ...

Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by pulling it off. 2. Turn the bulb holder counterclockwise and pull it out of the headlight housing. 3. Remove the connector from the bulb unit by pres ...

Using the information button
1. Press the information button . 2. All of the indicator lights will flash sequentially for approximately 7 seconds to indicate that the PCC is receiving information from the vehicle. If any o ...