Cargo compartment light
1. Carefully insert a screwdriver and pry out
the lens.
2. Pry out the bulb and replace it.
3. Press the lens back into place.
See also:
Setting a speed
Once ACC has been put in standby mode, use the
or
buttons to store (set) the vehicle's
current speed. This puts the system in active mode. The set speed, for example 55
mph, is shown in th ...
Indicator, information, and warning symbols
Indicator and warning symbols
1 High beam and turn signal indicators
2 Indicator and warning symbols
3 Information symbols
4 Indicator and warning symbols ...
BRAKE – Brake failure warning light
If the light comes on while driving or braking,
stop immediately, open the hood and check
the brake fluid level in the reservoir.
Canadian models are equipped
with this warning light. ...