Selecting a station (in wavebands AM/ FM1/FM2)
Automatic tuning
1. Press RADIO. Continue pressing this button to toggle to the desired waveband (AM, FM1, etc.).
2. Release the button and wait several seconds or press OK/MENU.
3. Press the left or right arrow keys on the center console control panel to search for the next available station.
List of stations (in wavebands FM1/FM2 only)
The radio automatically compiles a list of the strongest FM stations whose signals are currently being received. This enables you to find stations when driving in areas where radio stations and their frequencies are unfamiliar.
To access this list:
1. Select the desired waveband (FM1 or FM2).
2. Turn TUNE one step in either direction. This displays the list of stations in the area. The currently tuned station will be indicated in the list by magnified text.
3. Turn TUNE again in either direction to select a station on the list.
NOTE
- This list will only display the frequencies of the stations currently being received, not a complete list of all radio frequencies on the currently selected waveband.
- If the signal from the currently tuned station is weak, this may prevent
the radio from updating the list of stations. If this occurs, press
while the list of stations is displayed to switch to manual tuning mode and select a station. If the list of stations is no longer displayed, turn TUNE in either direction to display the list again and press
.
The list will disappear from the display after several seconds.
If the station list is no longer displayed, turn TUNE in either direction and
press on the number key pad on the
center console to switch to manual tuning (or to switch back from manual tuning
to the "list of stations" function).
Manual tuning
By default, the list of stations of the strongest stations in the area will be
displayed when you turn TUNE (see the preceding section, "List of stations"). While
the list of stations is displayed, press
on the number key pad on the center
console to switch to manual tuning, which enables you to select a frequency from
the complete list of all radio frequencies available on the currently selected waveband.
In other words, in manual tuning mode, turning TUNE one step will change from e.g.,
93.3 to 93.5, etc.).
To manually tune a station:
1. Press RADIO. Continue pressing this button to toggle to the desired waveband (AM, FM1, etc.) and wait for several seconds or press OK/MENU to confirm.
2. Turn TUNE to select a frequency
NOTE
The radio is initially set to automatically search for stations in the area in which you are driving (see the preceding section, "List of stations").
However, if you have switched to manual tuning (by pressing
on the number key pad on the center
console while the list of stations is displayed), the radio will remain in manual
tuning mode the next time it is switched on. To switch back to "list of stations"
mode, turn TUNE one step (to display the full list of stations) and press
.
Please note that if you press when
the list of stations is not displayed, this will activate the INFO function (see
page 210 for more information about this function).
See also:
Contacting Volvo
In the USA:
Volvo Cars of North America, LLC
Customer Care Center
1 Volvo Drive,
P.O. Box 914
Rockleigh, New Jersey 07647
1-800-458-1552
www.volvocars.us
In Canada:
Volvo Cars of Canada Corp
...
C30 in the Market
I enjoyed my time in the C30, and the more I drove it the more I liked it.
The good visibility and decent power (when using the manual shift feature) were
the highlights. The downsides are its lim ...
Tire sealing system–temporarily repairing a flat tire
Tire sealing system–temporarily repairing a flat tire
Temporarily repairing a flat tire is done in two
stages:
• Stage 1: The hole is sealed by pumping
sealing compound into the tire. The car ...