Switching to another device

It is possible to switch among paired Bluetooth devices that are in the vehicle. To do so:
1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.
2. Be sure the external device's Bluetooth function is turned on and that the device is "discoverable." See the devices user's guide if necessary.
3. Press OK/MENU.
4. Turn TUNE to Change Bluetooth device and confirm by pressing OK/ MENU.
> After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be displayed.
5. Select the device to be connected by turning TUNE and pressing OK/MENU to confirm.
> The external device will be connected to the infotainment system.
Audio files can now be selected using the
buttons in the center console or on
the steering wheel keypad.
See also:
Introduction
Your vehicle is equipped with tires according to the vehicle's tire information
placard on the B-pillar (the structural member at the side of the vehicle, at the
rear of the driver's door ...
USB
USB connector in glove compartment
If you connect an iPod
, MP3 player or a USB
flash drive to the optional USB connector, this
device can be controlled using the vehicle's
audio controls ...
Memory status
In phone mode, the memory status of the infotainment
system's phone book and the connected
cell phone's phone book can be seen
in Phone menu
Phone book
Memory
status. ...
