Activating/deactivating warning signals

The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on.
The audible warning signal can be activated/ deactivated by pressing MY CAR on the center console control panel and going to Settings Car settings Driver support systems Warning sound if risk of collision.
See also:
Removing the ball holder
1. Remove the cotter pin from the locking bolt
and slide the locking bolt out of the ball
holder/hitch assembly.
2. Pull the ball holder out of the hitch assembly.
NOTE
A cover for the hitch as ...
Operation
1 Auto open (arrow points toward the rear of the vehicle)
2 Manual open
3 Manual close
4 Auto close
WARNING
• During manual closing, if the laminated
panoramic roof is obstructed, immediately ...
IR-reflecting windshield
Section of the windshield where the IR-coating is
not applied
An optional factory-installed infrared (IR) coating
can be applied to the windshield to help
protect the cabin from the sun's heat a ...
