See also:

License plate lights
1. Switch off the ignition. 2. Loosen the screws with a Torx screwdriver. 3. Turn the bulb holder counterclockwise and pull it out. 4. Pull out the defective bulb and insert a new one. 5. Rein ...

Steps for Determining Correct Load Limit
1. Locate the statement "the combined weight of occupants and cargo should never exceed XXX pounds" on your vehicle's placard. 2. Determine the combined weight of the driver and pas ...

Introduction
Your vehicle is equipped with tires according to the vehicle's tire information placard on the B-pillar (the structural member at the side of the vehicle, at the rear of the driver's door ...