Returning to mode 0 from mode I

Open the driver's door.
See also:
Re-installing the wheel
1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
Tighten the lug nuts
3. Install the wheel nuts and tighten handtight.
Using the lug wrench, tight ...
Coolant
Location of the coolant reservoir
Normally, the coolant does not need to be changed. If the system must be drained,
consult a trained and qualified Volvo service technician.
See page 341 for inf ...
Reinserting the headlight housing
When reinserting the housing, be sure that the
long locking pin (to the left in the illustration) is
securely in place in both of its retaining clamps.
1. Plug in the connector until it clicks ...
