See also:

Intermittent wiping
With the lever in this position, you can set the wiper interval by twisting the thumb wheel upward to increase wiper speed or downward to decrease the speed. ...

Keylock
When you switch off the ignition, the gear selector must be in the P (Park) position before the key can be removed from the ignition switch. ...

Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4 turn counterclockwise and pull it out of the headlight housing. 2. Press in the bulb slightly and pull it out of the holder. 3. Align the guide lugs on ...