Operation
Press to operate the air quality sensor (normal
setting).
or:
Select one of the following three functions by
pressing 1, 2 or 3 times.
1. The AUT LED lights. The air quality sensor
is now activated.
2. No LED lights. Recirculation is not activated
unless needed to cool the passenger
compartment in a warm climate.
3. The MAN LED lights. Recirculation is now
activated.
Keep in mind the following:
• Make it a rule to have the air quality sensor
activated at all times.
• Recirculation is limited in cold climates to
avoid fogging.
• If window fogging occurs, you should
deactivate the air quality sensor. Also use
the defroster functions for the windshield,
side windows and rear window.
• The filter should be changed at the intervals
recommended in the service schedule.
However, if the vehicle is used in a severely contaminated environment, it may be necessary to change the filter more frequently.
See also:
Jump starting
Follow these instructions to jump start your
vehicle's dead battery or to jump start another
vehicle's dead battery using your vehicle.
Although your vehicle's battery is located
under the flo ...
Owner maintenance
Periodic maintenance requirements and intervals
are described in your vehicle's Warranty
and Service Records Information booklet.
The following points can be carried out
between the normally sch ...
Accessing the tire sealing system
The tire sealing system is stowed under the
floor of the cargo area. To access it:
1. Lift the floor hatch in the cargo area.
2. Lift out the tire sealing system.
NOTE
• The tire sealing system ...