Active chassis system–Four C*
See also:
Ignition mode 0
- Insert the remote key in the ignition slot and
press it in as far as possible. ...
Remote key not functioning
If the remote key is not functioning properly,
the alarm can be turned off and the vehicle can
be started as follows:
1. Open the driver's door with the key blade
(see page 61 for information o ...
Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off.
2. Pull the connector from the lamp housing.
3. Loosen the bulb's retaining spring by first
moving it to the right and then moving it out
of the way ...