Unlocking/locking

Unlocking
1. Insert the remote key into the ignition slot as far as possible.
2. Press the START/STOP ENGINE button.
> A sound will be audible when the lock releases.
Vehicles with keyless drive*
A remote key must be in the passenger compartment or trunk (but not inserted into the ignition slot)
Press the START/STOP ENGINE button.
> A sound will be audible when the steering wheel lock releases.
Locking
1. Switch off the engine (see page 116 for details).
2. Remove the remote key from the ignition slot.
3. Open the driver's door.
> A sound will be audible when the steering wheel lock engages.
Vehicles with keyless drive*
1. Switch off the engine (see page 116 for details).
2. Open the driver's door.
> A sound will be audible when the steering wheel lock engages.
See also:
Ignition mode I
NOTE
To access ignition modes I or II without starting
the engine, the brake pedal must not be
depressed.
- With the remote key fully pressed into the
ignition slot, press START/STOP
ENGINE ...
Changing wheels with TPMS
Please note the following when changing or
replacing the factory installed TPMS wheels/
tires on the vehicle:
• Only the factory-mounted wheels are
equipped with TPMS sensors in the valves.
• ...
Setting a speed
Use the or
buttons set the vehicle's current
speed. The set speed is shown in the display.
NOTE
Cruise control cannot be engaged at
speeds below 20 mph (30 km/h). ...
