Starting and stopping the engine
See page 114 for information on starting the engine and switching it off.
See also:
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...
Limitations
Main channel vs. sub-channels (FM only): The main channel is the only channel
that can receive in hybrid mode (both digital and analogue). If a frequency
has subchannels, they are broadcast i ...
BRAKE Brake circuit malfunction
The brake system is a hydraulic system consisting
of two master cylinders and two separate
brake circuits. If a problem should occur in
one of these circuits, it is still possible to stop
the vehi ...