Important information

See also:
Setting a speed
Once ACC has been put in standby mode, use the
or
buttons to store (set) the vehicle's
current speed. This puts the system in active mode. The set speed, for example 55
mph, is shown in th ...
Removing the headlight housing
1. Switch off the ignition by briefly pressing
the START/STOP ENGINE button.
2. Remove the remote key from the ignition
slot1.
3. (Upper illustration under "Headlight housing").
&nb ...
Folding the backrests in the front seat
The front passenger seat backrest can be
folded to a horizontal position to make room for
a long load. Fold the backrest as follows:
1. Move the seat as far back as possible.
2. Adjust the backr ...
