See also:

Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way ...

On/Off button
To activate the system: 1. Turn the ignition key to position I. NOTE If you switch off the ignition while the audio system is on, the system will be on when the ignition is switched on again. ...

Ignition mode functions
The various ignition modes are accessed with the remote key in the ignition slot1. ...