Operation
Settings are made by pressing MY CAR on the center console control panel and using the menus displayed.
See also:
Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of the
headlight housing.
2. Press in the bulb slightly and pull it out of
the holder.
3. Align the guide lugs on ...
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera lenses must be kept clean. They
can be wiped clean with a soft cloth or wet sponge.
CAUTION
Clean the lenses carefully to avoid scratching.
The ...
Power seat
Operation
Driver's seat: The seat can be adjusted if the
ignition key is in position I, II or if the engine is
running. It can also be adjusted as follows with
the ignition off:
• Within severa ...