Checking settings

The current Collision Warning settings can be
checked by pressing MY CAR on the center
console control panel and going to Settings
Car settings
Driver support systems
Collision Warning.
See also:
Attaching the towing eyelet
The towing eyelet is located under the floor of the trunk. This eyelet must
be screwed into the positions provided on the right sides of either the front
or rear bumper (see illustration).
...
Symbols in the instrument panel
WARNING
If and
come on at the same time
and the brake level is below the MIN mark
in the reservoir or if a brake system-related
message is shown in the information display: DO NOT DRIVE. ...
Severe strain on the brake system
The brakes will be subject to severe strain
when driving in mountains or hilly areas, or
when towing a trailer. Vehicle speed is usually
slower, which means that the cooling of the
brakes is less ...
