Manual operation
1. Opening the sun shade: Pull the control back to the first stop (the manual open position) and hold it until the sun shade has opened to the position of your choice.
2. Opening the rear edge of the laminated panoramic roof: Pull the control back to the first stop (the manual open position) a second time to open the rear edge of the laminated panoramic roof.
3. Opening the front glass section: Pull the control back to the first stop (the manual open position) a third time and hold it until the laminated panoramic roof has opened to the position of your choice.
Perform this procedure in reverse order to close the laminated panoramic roof and/or sun shade.
NOTE
For manual opening, the sun shade must
first be fully open before it will be possible
to open the laminated panoramic roof.
When closing, the laminated panoramic roof
must be fully closed before the sun shade
can be closed.
See also:
How do states use OBD II for emission inspections?
Many states connect a computer directly to a
vehicle's OBD II system. The inspector can
then read "faults." In some states, this type of
inspection has replaced the tailpipe emission
...
Cleaning the brake discs
Coatings of dirt and water on the brake discs may result in delayed brake function.
This delay is minimized by cleaning the brake linings.
Cleaning the brake pads is advisable in wet weather, prior ...
Making a call
1. Ensure that is shown at the
top of the
center console display and that the handsfree
function is in telephone mode.
2. Dial the desired phone number using the
center console keypad or use ...