Activating/deactivating park assist

The system is activated automatically when the vehicle is started.
• Press the Park assist button on the center
console (see page 64) to temporarily deactivate
the system(s). The indicator light in
the button will go out when the system has
been deactivated.
• Park assist will be automatically reactivated
the next time the engine is started, or if
the button is pressed (the indicator light in
the button will illuminate).
NOTE
• Front park assist is disengaged automatically
when the parking brake is
applied.
• If the vehicle is equipped with front and
rear park assist, both systems will be
deactivated by pressing the button.
See also:
Using the information button
1. Press the information button
2. All of the indicator lights will flash sequentially for approximately 7 seconds
to indicate that the PCC is receiving information from the vehicle. If any of the ...
Fuel filler cap
The fuel filler door, located on the right rear
quarter panel, is connected to your vehicle's
central locking system. ...
Washing the car
The following points should be kept in mind when washing and cleaning the car:
The car should be washed at regular intervals since dirt, dust, insects
and tar spots adhere to the paint and may ...
