Hazard warning flashers
Hazard warning flashers
The four-way flasher should be used to indicate that the vehicle has become a traffic hazard.
To activate the flashers, press the triangular button in the center dash. Press the button again to turn off the flashers.
NOTE
Regulations regarding the use of the hazard
warning flasher may vary, depending on
where you live.
Rear window and door mirror defroster
Press the switch to start
heating
the rear window and door
mirrors to remove ice or condensation.
A light in the switch will light up.
A timer automatically switches off the heating after approximately 12 minutes. The LED will go out correspondingly.
See also:
Unlocking a channel
A channel's access code2 is required to unlock a channel.
Unlock all channels
This permanently removes all channels from the locked list and makes them available
for selection.
Temporarily un ...
The radar sensor and its limitations
In addition to being used by ACC, the radar sensor is also used by Distance Alert
(see page 165) and Collision Warning with Full Auto-brake and Pedestrian Detection
(see page 173). This sensor is ...
Reprogramming a Single HomeLink Button
To program a device to HomeLink using a
HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink button.
DO NOT release the button.
2. The indicator light ...