Active Bending Lights (ABL)
When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration).
The ABL function is activated automatically when the engine is started and can be deactivated/ reactivated by pressing the button in the center console.
See also:
Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by
pulling it off.
2. Turn the bulb holder counterclockwise and
pull it out of the headlight housing.
3. Remove the connector from the bulb unit
by pres ...
Marker lines
The PAC system's lines
1 Marker line for a 1-foot (30-centimeter)
zone behind the vehicle
2 Marker line for the clear back-up zone
3 "Wheel tracks"
The solid line (1) indicates a zon ...
Manually adjusted front seats
1 Front-rear adjustment: lift the bar and
move the seat to the position of your
choice.
2 Raise/lower the front edge of the seat
cushion: use the control to pump the front
edge of the cushion u ...