See also:

Replacing the low beam bulb (halogenheadlights)
1. Remove the plastic cover over the bulb by turning it counterclockwise. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and t ...

Changing the set speed
After a speed has been set, it can be increased or decreased by using the or buttons. Each time one of these buttons is pressed, the vehicle's speed changes by 5 mph (approximately 8 km/h). ...

Limitations
In certain situations, the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system. NOTE If the BLIS indicator lights illuminate occasional ...