Scanning audio files on an external device
This function plays the first ten seconds of each audio file. This function can be activated/ deactivated under: Bluetooth menu Scan.
See also:
Installation
1. Lower the battery into the battery box.
2. Move the battery inward and to the side until it reaches the rear edge of
the box.
3. Tighten the clamp that secures the battery.
4. Connect the ve ...
IR-reflecting windshield
Section of the windshield where the IR-coating is not applied
An optional factory-installed infrared (IR) coating
can be applied to the windshield to help
protect the cabin from the sun's hea ...
Ignition mode II
- With the remote key fully pressed into the
ignition slot, press START/STOP
ENGINE for approximately 2 seconds. ...