Automatically folding down the rear seat’s outboard head restraints


1. The ignition must be in mode I or II.
2. Press the button to lower the rear head restraints for improved visibility.
NOTE
- The head restraint must be returned to the upright position manually.
- The outboard head restraints cannot be folded down on models that are not equipped with this button.
CAUTION
The rear head restraints should not be kept folded down for prolonged periods. This could result in pressure marks in leather upholstery.
WARNING
For safety reasons, no one should be allowed to sit in the outboard rear seat positions if the head restraints are folded down. If these positions are occupied, the head restraints should be in the upright (fixed) position.
See also:
Front footwell lighting
The front footwell lights are located under the
dashboard on the driver's and passenger's
sides.
To replace a bulb:
1. Carefully insert a screwdriver and pry out
the lens.
2. Replace the d ...
Introduction
Distance Alert is part of Adaptive Cruise Control
and is a function that provides information
about the time interval to the vehicle ahead.
Distance Alert is active at speeds above
approximatel ...
Start
Ignition switch with remote key inserted ( see page 82 for more information
on ignition modes)
WARNING
Before starting the engine:
• Fasten the seat belt.
• Check that the seat, steering wheel ...
