Introduction

The symbols in the vehicle's various displays
are divided into three main categories:
• Warning symbols
• Indicator symbols
• Information symbols
The following tables list the most common symbols, their meaning and the pages in this manual that provide more detailed information.
Warning symbol
The red warning symbol
lights up
to
indicate a problem related to safety and/or
drivability. A message will also appear in the
main instruments panel's display.
Information symbol
The information symbol
lights up
and a
text message is displayed to provide the driver
with necessary information about one of the
vehicle's systems.
See also:
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...
Uniform Tire Quality Grading
Quality grading information
ALL PASSENGER VEHICLE TIRES MUST
CONFORM TO FEDERAL SAFETY
REQUIREMENTS IN ADDITION TO THESE
GRADES
Quality grades can be found, where applicable,
on the tire sid ...
Operation
Controls and display
1 Resume previous settings, increase speed (each additional press increases
speed by 1 mph (approximately 2 km/h).
2 Standby mode on/off
3 Set time interval
4 Put in activ ...
