Turning ACC off completely
• From standby mode, press 
once.
• From active mode, press twice.
The set speed and time interval are then
cleared from the system's memory and cannot
be resumed by pressing 
.
See also:
Using the information button
1. Press the information button .
2. All of the indicator lights will flash sequentially
for approximately 7 seconds to indicate
that the PCC is receiving information
from the vehicle. If any o ...
Brake fluid reservoir
The brake fluid should always be above the
MIN mark on the side of the reservoir. Check,
without removing the cap, that there is sufficient
fluid in the reservoir.
Fluid type: DOT 4+ boiling poi ...
Hazard warning flashers
Location of the hazard warning flasher button
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
To activate the flashers, press the button
i ...