Home safe lighting

When you leave your vehicle at night, you can make use of the home safe lighting function to illuminate the area in front of the vehicle.
1. Remove the key from the ignition slot.
2. Pull the turn signal lever as far as possible towards the steering wheel and release it.
3. Exit the vehicle and lock the doors.
The headlights, parking lights, turn signals,
lights in the door mirrors, license plate lights,
and footwell lighting will illuminate and remain
on for 30 2, 60 or 90 seconds. The time interval
can be set in MY CAR under Settings
Car
settings
Light settings
Home safe light
duration. See page 133 for a description of
the menu system.
See also:
Filling washer fluid
Location of the washer fluid reservoir
The windshield and headlight washers share a common reservoir.
The washer fluid reservoir is located on the driver's side of the engine compartment.
Du ...
Active Bending Lights (ABL)
When this function is activated, the headlight
beams adjust laterally to help light up a curve
according to movements of the steering wheel
(see the right-pointing beam in the illustration).
The ...
Repairing stone chips
1. Place a strip of masking tape over the damaged surface. Pull the tape off
so that any loose flakes of paint adhere to it.
2. Thoroughly mix the primer and apply it with a small brush.
3. When ...
