See also:

Installation
1. Lower the battery into the battery box. 2. Move the battery inward and to the side until it reaches the rear edge of the box. 3. Tighten the clamp that secures the battery. 4. Connect the ve ...

Standby mode due to action by the driver
ACC is temporarily deactivated and put in standby mode: when the brakes are applied if the driver's seat belt is taken off If the driver's door is opened if the gear selector is move ...

Use
• Pull the cover over the cargo and hook it into the holes in the rear cargo area pillars. • To retract (roll up) the cover, release it from the holes and guide it toward the rear seat backrest ...