Image settings
Screen settings can be made for brightness, contrast, tint and color.
Press 
on the remote control and
change
the setting under Image settings on the
screen. See also page 251 for additional information
about the RSE menus.
See also:
Vanity mirror lights
1. Carefully insert a
screwdriver and pry out
the lens.
2. Pry out the bulb and replace it.
3. Carefully press the lower edge of lens onto
the four tabs and press the upper edge of
the lens in ...
Tilt position
Tilt position, raised at the rear edge
1 Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
2 Close by pulling the rear edge of the control ...
Power windows
The power windows are controlled by buttons
in the arm rests. The ignition switch must be
ON1 (ignition key in position I, II or the engine
running) for the electrically operated windows
to functi ...