Switching to another device
It is possible to switch among paired Bluetooth® devices that are in the vehicle. To do so:
1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.
2. Be sure the external device's Bluetooth® function is turned on and that the device is "discoverable." See the devices user's guide if necessary.
3. Press OK/MENU.
4. Turn TUNE to Change Bluetooth device and confirm by pressing OK/ MENU.
> After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be displayed.
5. Select the device to be connected by turning TUNE and pressing OK/MENU to confirm.
> The external device will be connected to the infotainment system.
Audio files can now be selected using the
buttons in the center console or on
the steering wheel keypad.
See also:
Fault tracing and actions
If the message Radar blocked See manual is
displayed, this means that the radar signals
from the sensor have been obstructed and that
a vehicle ahead cannot be detected.
This, in turn, means th ...
Manually unlocking the fuel filler door
Panel on passenger's side of cargo area
To manually unlock the fuel filler door
1. Open the upper and lower sections of the
tailgate, and fold up the rear section of the
cargo area floor.
2. If ...