Zoom

The camera can be useful when attaching a trailer. Press CAM to zoom in on the trailer hitch (and press this button again to return to the normal camera view).
With the camera zoomed in on the trailer hitch, a guiding line showing the hitch's path toward the trailer will be projected. This feature can be activated in the MY CAR menu, see page 134. The guiding lines for the wheels (see the following section "Guiding lines") and for the trailer hitch cannot be displayed at the same time.
If the camera shows an enlarged (zoomed) image, turn TUNE counterclockwise, or press EXIT, CAM or OK to return to a normal view.
See also:
Symbols in the instrument panel
WARNING
If and
come on at the same time
and the brake level is below the MIN mark
in the reservoir or if a brake system-related
message is shown in the information display: DO NOT DRIVE. ...
Front seats
Front seats
1 Lumbar support: turn the control for firmer
or softer lumbar support.
2 Front-rear adjustment: lift the bar and
move the seat to the position of your
choice.
3 Raise/lower fro ...
Keylock
When you switch off the ignition, the gear
selector must be in the P (Park) position before
the key can be removed from the ignition
switch. ...
