Putting ACC in standby mode

Putting ACC in standby mode  - Operation - Adaptive Cruise Control (ACC) - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

Before ACC can be used to regulate speed and/or the distance to a vehicle ahead, it must first be put in standby mode.

To do so:

Press The  symbol appears in the display.

The and symbol appears in the display and parentheses (---) indicate that ACC is in standby mode.

NOTE
The driver's door must be closed and the driver's seat belt must be fastened before ACC can be put in active mode. If the driver's seat belt is taken off or if the driver's door is opened, ACC will return to standby mode.

    See also:

    Environment
    Volvo and the environment Volvo is committed to the well being of its customers. As a natural part of this commitment, we care about the environment in which we all live. Caring for the environm ...

    Rear park assist
    The distance monitored behind the vehicle is approximately 5 ft (1.5 m). The audible signal comes from the rear speakers. The system must be deactivated when towing a trailer, carrying bicycles i ...

    Turning ACC off completely
    • From standby mode, press once. • From active mode, press twice. The set speed and time interval are then cleared from the system's memory and cannot be resumed by pressing . ...