Releasing the electric parking brake
Parking brake control
Manual release
1. Fasten the seat belt.
2. Insert the remote key in the ignition slot (or press the START/STOP ENGINE button on vehicles with the optional keyless drive).
3. Press firmly on the brake pedal.
4. Pull the parking brake control.
Automatic release
1. Start the engine.
NOTE
• For safety reasons, the parking brake is
only released automatically if the engine
is running and the driver is wearing a seat
belt.
• The electric parking brake will be
released immediately when the accelerator
pedal is pressed and the gear selector
is in position D or R.
2. Fasten the seat belt.
3. Move the gear selector to position D or R and press the accelerator pedal. The parking brake will release when the vehicle begins to move.
Heavy load uphill
A heavy load, such as a trailer, can cause the vehicle to roll backward when the parking brake is released automatically on a steep incline. To help avoid this:
1. Keep the electric parking brake lever pushed in with the left hand while shifting into Drive with the right.
2. While pressing the throttle pedal to pull away, release the parking brake lever only after the vehicle begins to move.
See also:
Auto
The function automatically
regulates cooling, heating, blower speed, recirculation, and air distribution to
maintain the chosen temperature. If you select one or more manual functions, the
other ...
Location of taillight bulbs
Brake lights (LEDs)
Brake light
Backup light
Turn signals
Rear fog light (driver’s side only)
NOTE
If an error message remains in the display after a faulty bulb has been replace ...
Interior
Like all good Scandinavian design, the S60's interior is simple and
functional. The materials have an upscale quality and look nice without trying
too hard. The floating center stack, which has st ...