Gate Operator/Canadian Programming
Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.
If you live in Canada or you are having difficulties programming a gate operator or garage door opener by using the “Programming” procedures, replace “Programming HomeLink” step 2 with the following:
• Continue to press and hold the HomeLink button while you press and release - every two seconds (“cycle”) your handheld transmitter until the HomeLink indicator light changes from a slow to a rapidly blinking light. Now you may release both the HomeLink and hand-held transmitter buttons.
Proceed with “Programming” step 3 to complete.
See also:
Behind the wheel
Driving the XC70's turbocharged 3.0-liter V-6 took some getting used to. I
appreciated the surprisingly zippy kick-in-the-pants feel, as opposed to the
sluggishly heavy acceleration I anticipated ...
Grocery bag holder
Grocery bag holder under the floor of the cargo area
The grocery bag holder holds shopping bags
in place.
1. Open the hatch in the floor of the cargo
area.
2. Secure the shopping bags with th ...
Fastening a seat belt
Buckling
Pull the belt out far enough to insert the latch plate into the receptacle until
a distinct click is heard. The seat belt retractor is normally "unlocked" and you
can move free ...