Introduction
The HomeLink Wireless Control System provides a convenient way to replace up to three hand-held radio-frequency (RF) transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems, even home lighting. Additional HomeLink information can be found on the Internet at www.homelink.com.
WARNING
• If you use HomeLink to open a garage
door or gate, be sure no one is near the
gate or door while it is in motion.
• When programming a garage door
opener, it is advised to park outside of
the garage.
• Do not use HomeLink with any garage
door opener that lacks safety stop and
reverse features as required by U.S. federal safety standards (this includes
any garage door opener model manufactured
before April 1, 1982). A garage
door that cannot detect an object - signaling
the door to stop and reverse -
does not meet current U.S. federal
safety standards. For more information,
contact HomeLink at: www.homelink.com.
Retain the original transmitter of the RF device you are programming for use in other vehicles as well as for future HomeLink programming. It is also suggested that upon the sale of the vehicle, the programmed HomeLink buttons be erased for security purposes. Refer to “Erasing HomeLink Buttons”.
See also:
Neutral position (N)
No gear is engaged and the engine can be
started with the gear selector in this position.
Apply the parking brake if the vehicle is stationary
with the gear selector in position N. ...
Introduction
Certain models are equipped with a tire sealing
system that enables you to temporarily seal a
hole in the tread surface and re-inflate a flat tire,
or to adjust a tire’s inflation pressure.
The ...
Climate control maintenance
Special tools and equipment are required to
maintain and carry out repairs on the climate
system. Work of this type should only be done
by a trained and qualified Volvo service technician. ...