Introduction
The laminated panoramic roof is divided into two sections.
• The rear glass section is fixed in place and cannot be moved.
• The front glass section can be slid horizontally to the open or closed positions or its rear edge can be raised and lowered to allow ventilation.
All references in this section to opening or closing the panoramic roof pertain to the front glass section.
The laminated panoramic roof also has a sun shade made of perforated fabric that is located below the sections of glass. This shade can be opened or closed, for example when driving in bright sunlight.
Both the laminated panoramic roof and the sun shade are operated by the controls in the ceiling console, near the rear-view mirror. The vehicle's ignition must be in mode I or II before the laminated panoramic roof/sun shade can be operated.
CAUTION • Remove ice and snow before opening the laminated panoramic roof.
• Do not operate the laminated panoramic roof if it is frozen closed.
• Never place heavy objects on the laminated panoramic roof.
See also:
Modifications
If you are considering modifying your vehicle in any way to accommodate a disability,
for example by altering or adapting the driver's or front passenger's seat(s) and/or
airbag systems, p ...
Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the retaining clamps by pressing
them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order. ...
Location of the bulbs in the headlighthousing
1 Low beam headlight/Active Bending Lights
2 High beam headlight (daytime running light
on models with Active Bending Lights)
3 Turn signal
4 Parking light
5 Side marker light ...