Selecting a magnetic zone
Magnetic zones.
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the compass to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar object, press and hold the button on the rear side of mirror for at least 3 seconds. The number for the current area will be shown.
3. Press the button repeatedly until the number for the required geographic area (1 – 15) is shown.
4. The display will revert to showing the compass direction after several seconds.
See also:
Introduction
The infotainment system in your vehicle is available in two versions:
High Performance Multimedia
7" color TFT display
Voice control1
Thumb wheel on the steering wheel keypad
AM/FM/HD ...
Arming the alarm
Press the Lock button on the remote key. One long flash of the turn signals
will confirm that the alarm is armed.
Alarm confirmation settings can be changed in MY CAR, under Car settings
- ...
Power seat
Operation
Driver's seat: The seat can be adjusted if the
ignition key is in position I, II or if the engine is
running. It can also be adjusted as follows with
the ignition off:
• Within severa ...