Operating
Operating the power windows
1 Manual up/down
2 Auto up/down.
All power windows can be operated using the control panel in the driver's door. The control panels in the other doors only operate the window in the respective doors.
For the power windows to function, the ignition must be in at least mode I. When the vehicle has been running, the power windows can be operated for several minutes after the remote key has been removed from the ignition slot, or until a door has been opened.
NOTE
• Movement of the windows will stop if
they are obstructed in any way.
• To reduce buffeting wind noise if the rear windows are opened, also open the front windows slightly.
Manual up/down
- Move one of the controls up/down slightly.
> The power windows move up/down as long as the control is held in position.
Auto up/down
- Move one of the controls up/down as far as possible and release it.
> The window will open or close completely.
See also:
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera
lenses must be kept clean. They can be wiped
clean with a soft cloth or wet sponge.
CAUTION
• Clean the lenses carefully to avoid
scratching.
• ...
Activating the system
Before any phone voice commands can be
used, a Bluetooth®-enabled cell phone must
be paired with the infotainment system. If a
phone command is given, the system will
inform you If there is no ...
Front/rear park assist
Front/rear park assist
The park assist system is designed to assist
you when driving into parking spaces, garages,
etc. It utilizes four ultrasound sensors located
in one or both bumpers to ...