Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Light settings Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
• The use of daytime running lights is
mandatory in Canada.
• Continuous high beams cannot be activated
when the headlight switch is in
position . High beam flash
will
function in this position.
See also:
Replacing the batteries
CAUTION
When handling batteries, avoid touching
their contact surfaces as this could result in
poor battery function in the remote key.
3 Note the position of the battery's (+) or (–)
sides.
...
Replacing the sealing compound container
The sealing compound container must be
replaced if:
• the tire sealing system has been used to
repair a tire.
• the container’s expiration date has passed
(see the date on decal).
NOTE
• Aft ...
Keyless drive remote key and driver's seat/door
mirror memory
• When you leave the vehicle with a PCC in
your possession and lock any door, the
position of the driver's seat and door mirrors
will be stored in the seat's memory.
• The next time a door is o ...