Re-assembling the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the key blade up.
3. Carefully slide the key blade into its groove.
4. Gently press the key blade in the groove until it clicks into place.
Old batteries should be properly recycled.
See also:
Windshield wipers/washers
Windshield wipers and washers
1 - Rain sensor* on/off
2 - Thumb wheel sensitivity/frequency
CAUTION
Use ample washer fluid when washing the windshield. The windshield should
be thoroughly ...
Inserting the remote key
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustration
and press it in as far as possible (past the
detent) ...
Replacing high/low beams/turn signal/parking light bulbs
WARNING
• The engine should not be running when
changing bulbs.
• If the engine has been running just prior
to replacing bulbs in the headlight housing,
please keep in mind that components
in th ...