Using the information button
1. Press the information button .
2. All of the indicator lights will flash sequentially for approximately 7 seconds to indicate that the PCC is receiving information from the vehicle. If any of the buttons are pressed during this 7-second period, transmission of information to the PCC will be interrupted.
NOTE
If none of the indicator lights flash when the
information button has been pressed several
times from different places in relation to
the vehicle, contact an authorized Volvo
service technician.
The indicator lights provide information according to the illustration:
1 Steady green light: the vehicle is correctly locked.
2 Steady yellow light: the vehicle is not locked.
3 Steady red light: the alarm has been triggered.
4 Both red lights flash alternatively: the alarm was triggered less than 5 minutes ago.
See also:
Introduction
Two remote keys or optional Personal Car Communicators (PCC) are provided with
your vehicle. They enable you to unlock the doors and trunk, and also function as
ignition keys to start the vehicle ...
Polishing and waxing
• Normally, polishing is not required during
the first year after delivery, however, waxing
may be beneficial.
• Before applying polish or wax the vehicle
must be washed and dried. Tar spots can
...
Recirculation/air quality system
Recirculation
This function can be
used to shut out exhaust fumes, smoke, etc., from the passenger compartment. The
air in the passenger compartment is then recirculated, i.e., no air from outsid ...