Attempting to start the vehicle
If damage to the vehicle is minor and there is no fuel leakage, you may attempt to start the vehicle. To do so:
1. Remove the remote key from the ignition slot and open the driver's door. If a message is displayed that the ignition is on, press the start button.
2. Close the driver's door and reinsert the remote key in the ignition slot.
3. Try to start the vehicle.
If the message Safety mode See manual is still displayed, the vehicle should not be driven and must be towed. Concealed faults may make the vehicle difficult to control.
See also:
Checking settings
The current Collision Warning settings can be
checked by pressing MY CAR on the center
console control panel and going to Settings
Car settings
Driver support systems
Collision Warnin ...
Using the information button
1. Press the information button
2. All of the indicator lights will flash sequentially for approximately 7 seconds
to indicate that the PCC is receiving information from the vehicle. If any of the ...
Battery
• Ensure that the battery cables are correctly
connected and tightened.
• Never disconnect the battery when the
engine is running (e.g., when replacing the
battery).
• Never use a fast charger to ...