Auxiliary sound level
If the external sound source's volume is too high, the quality of the sound may be impaired.
This can be prevented by adjusting the external sound source's input volume.
1. While playing the radio or a CD, lower the
audio volume to about one-quarter.
2. Switch to AUX mode on the audio system.
3. Connect the headphone output from your
music player to the AUX input using a cable
with a stereo 3.5 mm miniplug at both
ends.
4. Set your music player's headphone volume
to three-quarters using the player's
volume controls.
5. Select AUX VOLUME in the menu and
press ENTER.
6. Adjust the volume with SELECTOR (1) or
with the up/down arrows (2) and press
ENTER.
7. If there is distortion, lower your music player's
headphone volume until the distortion
goes away.
Finally, exit the menu and adjust the audio volume to a comfortable level.
NOTE
This cannot be done with the steering wheel
keypad.
See also:
C30 in the Market
I enjoyed my time in the C30, and the more I drove it the more I liked it.
The good visibility and decent power (when using the manual shift feature) were
the highlights. The downsides are its lim ...
Speed rati
The speed ratings in the table translate as follow:
Speed ratings
M
81 mph (130 km/h)
Q
100 mph (160 km/h)
T
118 mph (190 km/h)
H
130 mph (210 km/h)
...
Direct channel entry
The Sirius satellite channels are in numerical order throughout all of the categories.
To access a channel directly:
1. Turn TUNE to access the channel list.
2. Use the number key buttons to enter ...