Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of the
headlight housing.
2. Press in the bulb slightly and pull it out of
the holder.
3. Align the guide lugs on the side of the base
of the new bulb in the grooves in the holder.
Press it in and turn it slightly clockwise.
4. Press the lamp holder into the place in the headlight housing and turn it approximately 1/4 turn clockwise.
See also:
Headlight housing
The entire headlight housing must be lifted out when replacing all front bulbs.
CAUTION
Never touch the glass of bulbs with your fingers. Grease and oils from your fingers
vaporize in the heat ...
Steering wheel keypad
The keypad varies according to the vehicle's equipment
1 Turn the thumb wheel to go up/down
among menu selections. Press the thumb
wheel to make a selection or store a function
in the system' ...
Cargo compartment light
1. Carefully insert a screwdriver and pry out
the lens.
2. Pry out the bulb and replace it.
3. Press the lens back into place. ...