Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off.
2. Pull the connector from the lamp housing.
3. Loosen the bulb's retaining spring by first
moving it to the right and then moving it out
of the way.
4. Pull out the bulb from the holder.
5. Insert the new bulb (without touching the
glass) in the holder.
6. Move the retaining spring up and push it
slightly to the left until it seats properly.
7. Press the bulb holder into place on the
headlight housing.
8. Press the rubber cover into place.
See also:
Side windows and laminated panoramic roof
To ensure that the air conditioning works optimally,
the side windows, and the laminated
panoramic roof should be closed. ...
Child Seats
Speaking of families, we installed some child-safety seats to see how they
fit. There are two sets of Latch anchors in back that are hard to locate, and
there are two top-tether anchors midway dow ...
Recalibrating TPMS (Canadian models only)
In certain cases, it may be necessary to recalibrate TPMS to conform to Volvo's
recommended tire inflation pressures (see the inflation pressure table on page 275),
for example, if higher infl ...