Switching BLIS on and off
BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times.
• The system can be switched off by pressing
the BLIS button in the center console
(see the illustration). The indicator light in
the button goes out when the system is
switched off, and a text message is displayed.
• BLIS can be switched on again by pressing
the button. The indicator light in the button
will illuminate and a new text message will
be displayed. Press the READ button to erase the message.
The messages listed above can only be displayed if the ignition key is in position II (or if the engine is running) and if BLIS is active (i.e.
if the system has not been turned off by pressing the BLIS button).
See also:
Unlocking a channel
A channel's access code is required to unlock
a channel.
Unlock all channels
This permanently removes all channels from
the locked list and makes them available for
selection.
Temporarily unl ...
Technician certification
In addition to Volvo factory training, Volvo supports
certification by the National Institute for
Automotive Service Excellence (A.S.E.). Certified
technicians have demonstrated a high
degree of c ...
Hoisting the vehicle
If a garage jack is used to lift the vehicle, the two jack attachments points
should be used.
They are specially reinforced to bear the weight of the vehicle. A garage jack
can also be placed u ...