Emergency Brake Assistance (EBA)
The EBA function is designed to provide full brake effect immediately in the event of sudden, hard braking. The system is activated by the speed with which you depress the brake pedal.
NOTE
• When the EBA system is activated, the
brake pedal will go down and pressure
in the brake system immediately increases
to the maximum level. You must
maintain full pressure on the brake
pedal in order to utilize the system completely.
There will be no braking effect if
the pedal is released. EBA is automatically
deactivated when the brake pedal
is released.
• When the vehicle has been parked for
some time, the brake pedal may sink
more than usual when the engine is
started. This is normal and the pedal will
return to its usual position when it is
released.
See also:
General information
The infotainment system displays information
in four different views. The highest (most general)
level is called the main view and is common
to all system modes (RADIO, MEDIA,
TEL). Each mode ...
Tailgate wiper/washer
A section of the switch
O Neutral position: The wiper is switched
off
B Normal (continuous) wiping: Press the
lower section of the switch
Move the lever forward to start the tailgate
washer. A ...
Function
The driver sees what is behind the vehicle and
if a person or animal should suddenly appear
from the side.
PAC is mounted on the tailgate, near the opening
handle.
The camera has built-in el ...